California
Installation Diagrams
Connecting the high-definition digital receiver to an HDTV using the included cables
This is a common configuration for HDTV’s which uses the component cables provided
by your Charter Business Quick-Start Install kit.
What you will need:
STEP ONE: Connect the coax cable between the cable wall outlet
and the
CABLE IN port on the high-definition digital receiver.
STEP TWO: Locate the
Y, Pb, Pr inputs on the HDTV
and the Y, Pb, Pr outputs on the high-definition digital receiver. (Y=green, Pb-blue,
Pr-red). Connect the provided component cable (red, blue green) to the
Y, Pb,
Pr OUT ports on the high-definition digital receiver and the corresponding
IN ports on the HDTV.
STEP THREE: Connect the RCA cables between the
DIGITAL AUDIO
OUT R (red)/
DIGITAL AUDIO OUT L (white) ports on the
high-definition digital receiver with the
AUDIO IN R (red)/
AUDIO
IN L (white) ports on the HDTV.
STEP FOUR: Plug in and turn on your devices. Select the input source
on your HDTV that you used. Click
here to program your picture settings.
Connecting the high-definition digital receiver to an HDTV using a DVI cable (DVI
cable sold separately)
This is the configuration you will use if you already have a DVI connector for your
HDTV.
What you will need:
STEP ONE: Connect the coax cable between the cable wall outlet
and the
CABLE IN port on the high-definition digital receiver.
STEP TWO: Connect the
DVI cable between the
DVI
port on the HD Receiver and the DVI/HDCP IN port on the HDTV.
STEP THREE: Connect the
RCA cables between the
DIGITAL AUDIO OUT R (red)/
DIGITAL AUDIO OUT L
(white) ports on the high definition digital receiver with the
AUDIO IN R
(red)/
AUDIO IN L (white) ports on the HDTV.
STEP FOUR: Plug in and turn on your devices. Select the DVI input
source on your HDTV. Click
here to program your picture settings.
Connecting the high-definition digital receiver to an HDTV and a stereo VCR
This configuration allows you to watch HD and standard-definition video on your
HDTV as well as record and play standard-definition video through your VCR.
What you will need:
STEP ONE: Connect the coax cable between the cable wall outlet
and the
CABLE IN port on the high-definition digital receiver.
STEP TWO: Connect the provided component cable between the
Y, Pb, Pr OUT (Y=green, Pb-blue, Pr-red) ports on the high-definition
digital receiver and the corresponding
Y, Pb, Pr IN ports on the
HDTV.
STEP THREE: Connect RCA composite cables (red, white, yellow) between
the
DIGITAL AUDIO OUT R (red)/
DIGITAL AUDIO OUT L
(white) and
VIDEO OUT (yellow) ports on the high-definition digital
receiver with the
AUDIO IN R (red)/
AUDIO IN L
(white) and
VIDEO IN (yellow) ports on the VCR.
STEP FOUR: Repeat Step three using a second set of RCA Cables between
the VCR and HDTV.
STEP FIVE: Plug in and turn on your devices. Select the input source
on your HDTV that corresponds with the ports that you used on the back of your HDTV.
Click
here to program your picture settings.
Connecting the high-definition digital receiver to an HDTV and an DVD player
If you have a DVD player, connect it directly to the HDTV as indicated below.
What you will need:
Steps ONE, TWO, and THREE: Click
here for instructions on connecting the HDTV to
the high-definition digital receiver. (You will use the coax cable and Y, Pb, Pr
cables for this step).
After connecting your HD digital receiver to your HDTV as demonstrated on
top,
complete the following steps to connect your DVD player.
- STEP ONE: Connect the RCA video cable (yellow) between the
VIDEO OUT port on the DVD player and a VIDEO IN port on the HDTV.
- STEP TWO: Connect the RCA audio cables (red and white) between
the AUDIO OUT L (white) /AUDIO OUT R (red) ports
on the DVD player and the AUDIO IN L (white) /AUDIO IN R
(red) ports on the HDTV.
Connecting the high-definition digital receiver to an HDTV and an A/V receiver
To get the best possible audio performance out of your HD service, use an A/V receiver
for sound production. Follow the cabling instructions below.
What you will need:
STEP ONE: Connect the coax cable between the cable wall outlet
and the
CABLE IN port on the high-definition digital receiver.
STEP TWO: Connect the provided component cable to the
Y, Pb,
Pr OUT ports (Y=green, Pb-blue, Pr-red) on the high-definition digital
receiver and the corresponding IN ports on the HDTV.
STEP THREE: Connect RCA composite cables between the
DIGITAL
AUDIO OUT R (red)/
DIGITAL AUDIO OUT L (white) ports
on the highdefinition digital receiver with the
AUDIO IN R (red)/
AUDIO
IN L (white) ports on the A/V Stereo Receiver.
STEP FOUR: Plug in and turn on your devices. Confirm that you have
selected the correct source inputs for each device. Click
here to program your picture
settings.