West Virginia
Installation Diagrams
Connecting the HD digital receiver to an HDTV using the included cables
This is a common configuration for HDTV’s. Use this configuration with the com-ponent
cables (red, blue, green) provided in your Charter Business Quick-Start Install
Kit
STEP ONE: Connect the coax cable between the cable wall outlet
and the
CABLE IN port on the HD digital receiver.
STEP TWO: Locate the component cable
(Y, Pb, Pr)
ports on the HDTV and the component cable
(Y, Pb, Pr) ports on
the HD digital receiver. (Y=green, Pb=blue, Pr=red). Connect the provided component
cable (red, blue green) to the
Y, Pb, Pr OUT ports on the HD digital
receiver and the corresponding
IN ports on the HDTV.
STEP THREE: Connect the RCA composite cables (red and white) between
the
DIGITAL AUDIO OUT R (red)/DIGITAL AUDIO OUT L (white) ports
on the HD digital receiver with the
AUDIO IN R (red)/AUDIO IN L (white)
ports on the HDTV.
STEP FOUR: Plug in and turn on your devices. Select the input source
on your HDTV that you used. Click
here to program your HD picture
settings.
Connecting the HD digital receiver to an HDTV using a DVI cable (DVI cable sold
separately)
This is the configuration you will use if you already have a DVI connector for your
HDTV. (not all HDTV’s have this connection option)
STEP ONE: Connect the coax cable between the cable wall outlet
and the
CABLE IN port on the HD digital receiver.
STEP TWO: Connect the DVI cable between the DVI port on the HD
digital receiver and the
DVI/HDCP IN port on the HDTV.
STEP THREE: Connect the RCA composite cables (red and white) between
the
DIGITAL AUDIO OUT R (red)/DIGITAL AUDIO OUT L (white) ports
on the HD digital receiver with the
AUDIO IN R (red)/AUDIO IN L (white)
ports on the HDTV.
STEP FOUR: Plug in and turn on your devices. Select the input source
on your HDTV that you used. Click
here to program your HD picture
settings.
Connecting the HD digital receiver to an HDTV using an HDMI connector (HDMI cable
sold separately)
This is the configuration you will use if you already have an HDMI cable for your
HDTV. The HDMI cable carries both digital audio and high-definition digital video
signal. (Not all HDTV’s and not all Charter Digital Receivers have this connection
type available).
What you will need:
STEP ONE: Connect the coax cable between the cable wall outlet
and the
CABLE IN port on the HD digital receiver.
STEP TWO: Connect the HDMI cable between the HDMI port on the HD
digital receiver and the HDMI port on the HDTV.
STEP THREE: Plug in and turn on your devices. Select the HDMI input
source on your HDTV. Click
here to program your HD picture settings.
Connecting the HD digital receiver to an HDTV and a stereo VCR
This configuration will allow you to watch both high-definition and standarddefinition
video on your HDTV as well as record and play standard-definition video through
your VCR. For this configuration, your VCR may need to be turned on.
What you will need:
STEP ONE: Connect the coax cable between the cable wall outlet
and the
CABLE IN port on the HD digital receiver.
STEP TWO: Connect the provided component cable to the
Y, Pb,
Pr OUT ports (Y=green, Pb=blue, Pr=red) on the HD digital receiver
and the corresponding
IN ports on the HDTV.
STEP THREE: Connect the RCA composite cables (red and white) between
the
DIGITAL AUDIO OUT R (red)/DIGITAL AUDIO OUT L (white) ports
on the HD digital receiver with the
AUDIO IN R (red)/AUDIO IN L (white)
ports on the stereo VCR. Then use the yellow RCA composite cable to connect the
VIDEO OUT port on the HD digital receiver with the
VIDEO IN
(yellow) port on the VCR.
STEP FOUR: Connect another set of RCA composite cables between
the
DIGITAL AUDIO OUT R (red)/DIGITAL AUDIO OUT L (white) ports
on the VCR with the
AUDIO IN R (red)/AUDIO IN L (white) ports on
the HDTV. Then use the yellow RCA composite cable to connect the
VIDEO OUT
port on the VCR with the
VIDEO IN (yellow) port on the HDTV.
STEP FIVE: CPlug in and turn on your devices. Select the input
source on your HDTV that corresponds with the ports you used on the back of the
HDTV. Click
here to program your HD picture settings.
Connecting the HD digital receiver to an HDTV and a DVD player
If you have a DVD player with your HDTV connect it directly to the HDTV as indicated
below.
What you will need:
STEP ONE:Connect the coax cable between the cable wall outlet and
the
CABLE IN port on the HD digital receiver.
STEP TWO: Locate the component cable (Y, Pb, Pr) ports on the HDTV
and on the HD digital receiver. (Y=green, Pb=blue, Pr=red). Connect the provided
component cable (red, blue green) between the
Y, Pb, Pr OUT ports
on the HD digital receiver and the corresponding
IN ports on the
HDTV.
STEP THREE: Connect RCA composite cables (red and white) between
the
DIGITAL AUDIO OUT R (red)/DIGITAL AUDIO OUT L (white) ports
on the HD digital receiver and the
AUDIO IN R (red)/AUDIO IN L (white)
ports on the HDTV.
STEP FOUR: Connect RCA audio (red and white) cables between the
DIGITAL AUDIO OUT R (red)/DIGITAL AUDIO OUT L (white) ports on
the DVD player with the
AUDIO IN R (red)/AUDIO IN L (white) ports
on the HDTV. Then connect the RCA video cable (yellow) between the
VIDEO OUT
(yellow) port on the DVD player and the
VIDEO IN port
on the HDTV.